TM9-4120-401-14
4-32.
LOGIC BOX ASSEMBLY (LGC1). - continued
NOTE
FOLLOW-ON MAINTENANCE:
Install motor controller assembly (para 4-31).
WIRING HARNESSES.
c. Repair
d. Replace
This task covers:
a. Inspect
b. Test
INITIAL SETUP
Equipment
Conditions:
Tools
Refrigeration Unit Service Tool Kit
Appendix B, item 1
Materials/Parts
Use disconnect switch (NOT POWER
CABLE) to disconnect power to unit.
Wiring Harness
Damage to cable connector pins will
result it cable is used.
Disconnect power at power source.
Remove panels or components as necessary to
access wiring harnesses.
a. Inspect.
(1) Disconnect and inspect connectors for loose, damaged or missing pins. Replace if defective.
