TM9-4120-401-14
THERMISTOR (RT1). - continued
4-35.
(11) Carefully route thermistor (1) along unit wiring harness.
(12) Place clamp (10) around thermistor(1) leads and wiring harness and secure with screw (7), lock washer
(8), and flat washer (9).
(13) Place two clamps (13) around thermistor (1) leads and wiring harness and secure with two screws (11)
and lock nuts (12).
(14) Connect (P3) harness leads (4) to terminal board (TB3) (5) using tags and wiring diagram (figure 4-6).
Remove tags.
(15) Connect connector (P3) (2) to logic box connector (J3) (3).
NOTE
FOLLOW-ON MAINTENANCE:
install top panel (para 4-11).
Connect power at power source.
