TM 9-4120-401-14
INPUT POWER CONNECTOR (INSTALLATION).
b. Replace
This task covers:
a. Inspect
INITIAL SETUP
E q u i p m e n t Condition
Tools
Refrigeration Unit Service Tool Kit
Appendix B, item 1
Use disconnect switch (NOT POWER
CABLE) to disconnect power to unit.
Damage to cable connector pins will
result if cable is used.
Disconnect power at power source.
NOTE
cable/connector.
a.
Check for loose, missing, or damaged pins and cut or broken wires on connector or any other damage.
b. Replace.
Replace damaged wires or connector. (See paragraph 4-24.)
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-122
