TM 9-4120-402-14
4-10. FABRIC COVER. - continued
a. Inspect.
(1) Inspect for rips, cuts, tears, or punctures in the fabric. If damaged, notify supervisor.
(2) Inspect for damaged, loose, or missing eyelets (1) and snap fasteners (2). If damaged, notify supervisor.
b. Clean.
Wash the canvas cover using a solution of fresh water and a mild detergent. A soft scrub brush may be used to
remove caked deposits. Thoroughly rinse with fresh water and air dry.
c. Replace.
(1)
Roll cover (3) down and secure snap fasteners (2).
(2)
Remove four screws (4), eight flat washers (5), and four packing with retainers (6) from the top.
(3)
Remove ten sets of screws (7) and flat washers (8) from the sides.
(4)
Remove four sets of screws (9), lock washers (10), and flat washers (11).
(5)
Carefully remove the fabric cover.
(6)
Aline eyelets (1) to casing mounting holes.
(7)
Secure top of fabric cover with fourscrews (4), eight flat washers (5), and four packing with retainers (6).
(8)
Secure sides with ten sets of screws (7) and flat washers (8).
(9)
Secure bottom with four sets of screws (9), lock washers (10), and flat washers (11).
(10)
If unit is to be returned to normal operation, open the snap fasteners (2), roll up the back flap, and secure it
with the stowing straps (12) and turn button fasteners (13).
4-53
