TM 9-4120-402-14
4-13. CONNECTOR COVER PLATES. - continued
a. Inspect.
Check that cover plate (1) is not bent, cracked, or punctured. If damaged, notify supervisor.
WARNING
Dry cleaning solvent used to clean parts is potentially dangerous to personnel and property. Do
not use near open flame or excessive heat. Use in well ventilated area.
b. Clean.
Clean with a cloth dampened with a detergent solution or dry cleaning solvent. Use a soft brush if necessary to
dislodge caked on dirt. Dry thoroughly.
c. Replace.
(1)
Remove four sets of screws (2), lock washers (3), and nuts (4).
(2)
Remove cover plate (1).
(3)
Aline cover plate (1) mounting holes with casing.
(4)
Secure cover plate (1) to casing with four sets of screws (2), lock washers (3), and nuts (4).
4-14. CONDITIONED AIR DISCHARGE (OUTLET) GRILLE ASSEMBLY.
This task covers:
a. Remove
b. Inspect
c.
Clean
d. Install
e. Adjust
INITIAL SETUP
Tools
Materials/Parts
Refrigeration Unit Service Tool Kit
Conditioned Air Discharge Grille Assembly
Rags
Scrub Brush
Dry Cleaning Solvent
Detergent
a. Remove.
(1) Loosen six captive turn lock stud fasteners (1).
(2) Remove grille (2).
4-58