TM 9-4120-402-14
5-36. BLAST DAMPER. - continued
c. Repair.
NOTE
Repair of fresh air cover and blast damper is limited to replacement of damaged parts only.
Gaskets.
(a) Remove as much old gasket material as possible by pulling or scraping it away from the metal surface.
WARNING
Adhesive remover is flammable and the vapors can be explosive. Repeated or prolonged skin
contact or inhalation of vapors can be toxic. Use in a well ventilated area, wear gloves, and keep
away from sparks or flame.
(b) Soften and remove old adhesive and gasket residue using adhesive remover and a stiff brush.
(c) Coat the mating surfaces of the metal and new gasket material with adhesive. Let both surfaces air dry
until the adhesive is tacky but will not stick to fingers.
(d) Starting with an end, carefully attach the new gasket material to the metal. Press into firm contact all
over.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
5-95/(5-96 blank)
