TM 9-4120-402-14
5-35. INSULATION. - continued
b. Replace.
(1) Remove as much old insulation material as possible by pulling or scraping it away from the metal
surface.
WARNING
Adhesive remover is flammable and the vapors can be explosive. Repeated or prolonged skin
contact or inhalation of vapors can be toxic. Use in a well ventilated area, wear gloves, and keep
away from sparks or flame.
(2) Soften and remove old adhesive and insulation residue using adhesive remover and a stiff brush.
(3) See Appendix F to identify and fabricate insulation to be replaced using material specified.
(4) Coat the mating surfaces of the metal and new insulation material with adhesive. Let both surfaces air
dry until the adhesive is tacky but will not stick to fingers.
(5) Starting with an end, carefully attach the new insulation material to the metal. Press into firm contact all
over.
NOTE
FOLLOW-ON MAINTENANCE:
Install any panels or covers removed for access.
5-90