TM 9-4120-403-14
(15) Secure enclosure, backing plate, gasket, and switch nameplate with four screws.
Follow-on procedures:
(1) Replace the dehydrator. (See para 5-23.)
(2) Purge system. (See para 5-8.)
(3) Leak test all newly connected joints and those in the repaired area. (See para 5-10.)
(4) Evacuate the refrigeration system. (See para 5-11.)
(5) Charge the refrigeration system, but do not operate unit. (See para 5-12.)
(6) Install fan motor. (See para 4-57.)
(7) Run unit and check operation. (See para 5-12.)
(8) Install top panel. (See para 4-16.)
(9) Press and release pressure switch reset buttons to be sure they are not tripped.
5-60
