TM 9-4120-404-14
(3) Loosely install twelve flat washers (5), four bushings (4), four grommets (3), four flat washers (2), and four
screws (1).
(4) Refer to tags installed during removal and connect all motor wires to connectors as required, and then
remove temporary tags.
(5) Center all components to eliminate contact between all rotating components and then tighten all hardware.
(6) Repeat for other motor.
(7) Install rear cover (see para. 3-27).
(8) Reconnect air conditioner to power source.
3-81
