TM 9-4120-404-14
b. Installation.
(1) Install scroll support (22), four nuts (21), four flat washers (20), and four screws (19).
(2) Install spacer (18), clamp (17), flat washer (16), lock washer (15), and screw (14).
(3) Install two spac ers (13), two grommets (12), and condenser scroll (11) into unit.
(4) Install two grommets (10), two flat washers (9), and two screws (8).
(5) Install two clamps (7), spacer (6), two flat washers (5), two lock washers (4), and two screws (3).
(6) Install two flat washers (2) and two screws (1).
(7) Repeat for other condenser scroll.
(8) Install condenser exhaust louver (see para. 3-22).
(9) Install condenser motors (see para. 3-34).
(10) Install louver actuator cables (see para. 3-35).
(11) Install dehydrator (see para. 4-18).
(12) Install liquid sight indicator hardware (see para. 4-27).
(13) Install rear cover (see para. 3-27).
4-31
