TM 9-4120-404-14
4-28. COMPRESSOR (B1). - Continued.
WARNING
Serious injury could occur if heavy equipment is moved or lifted without sufficient
personnel to do the job. Use proper physical lifting procedures or use a suitable
lifting device or dolly. Wear safety shoes, gloves, and other suitable protective
Clothing.
CAUTION
Running unit with improper oil level will damage unit. The compressor is supplied
with a complete charge of oil. Take care that oil is not lost when handling and
installing compressor.
(1) Place compressor (8) into position on mounting base in unit.
(2) Lift or tilt the compressor (8) and install four compressor mounting bushings (11), four large flat washers
(10), and four resilient washers (9) between each of the four compressor mounting holes and the holes in the compressor
mounting base.
(3) Install four resilient washers (7), four large flat washers (6), four flat washers (5), four bolts (4), four large
flat washers (3), four flat washers (2), and four nuts (1).
CAUTION
Heat from brazing can damage compressor. Wrap wet rags around compressor at
connection points and while brazing direct flame away from compressor during
brazing.
(6) Connect electrical connector plug P4 to connector J4 on compressor junction box.
4-72