TM 9-4120-405-13&P
4-21. STORAGE AND ACCESSORY BOXES (Figure 4-12).
This Task Covers:
a. Replace
b. Repair
Initial Setup:
Tools Required
Tool kit, general mechanics
Riveter, blind hand
REMOVAL.
1.
Remove two nuts (1), four flat washers (2), and two screws (3).
2.
Remove storage box (4) from storage box bracket (5).
3.
Remove four nuts (6), eight flat washers (7), and four screws (8).
4.
Remove storage box bracket (5).
5.
Remove four nuts (9), eight flat washers (10), and four screws (11).
6.
Remove accessory box (12).
REPAIR.
Box repair is limited to straightening dents and bends and replacement of catch clamps.
INSTALLATION.
1.
Position accessory box (12) on fender.
2.
Install four screws (11), eight flat washers (10), and four nuts (9).
3.
Position storage box bracket (5) on trailer.
4.
Install four screws (8), eight flat washers (7), and four nuts (6).
5.
Position storage box (4) on storage box bracket (5).
6.
Install two screws (3), four flat washers (2), and two nuts (1).
4-31
