TM 9-4120-405-13&P
c.
Trailer Ground Wire.
(1)
Traile r attachment.
Cut off terminal lug. Refer to paragraph 4-19 for crimping. Install new terminal lug.
Cut off frayed wire. Trim back rubber insulation far enough to clear broken or damaged wire plus 2 inches. Fold 2-
inch wire in half and twist.
INSTALLATION.
1. Install flat washer (16), nut (15), flat washer (14), ground wire terminal lug (13), washer (12), and nut (11) onto
ground terminal.
2.
Install flat washer (10), ground wire terminal lug (9), lockwasher (8), and screw (7) to air conditioner.
3.
Connect power cable connector (6) to air conditioner.
WARNING
Before attempting to connect power cable, make sure the generator set is not
operating, all switches are in the off or open position, and set is grounded.
4. Position trailer ground wire (5) and air conditioner ground wire (4) in LO terminal slot and four cable leads (3) in
corresponding terminal slots.
5.
Secure four terminal retaining nuts (2) and clasp wire retainer (1).
6.
4-30