TM 9-4120-407-14
Table 3-2. Unit Preventive Maintenance Checks and Services for Model F36T-MPI
Location
Not Fully Mission Capable
Item To
Procedures
Interval
Item
if:
Check/Service
No
EXTERIOR
Damaged to prevent safe
Screen/Guard
Check screen/guard (1) for any
Quarterly
1
operation.
damage such as dents, tears
or cracks. If damaged,
replace it per
If screen/guard (1) is dirty, clean Screen/guard obstructed.
it per the following:
(1) Remove the screen/guard per
(2) Mix a small quantity of
detergent
(Item 13, Appendix E) with
clean water to make a wash
solution.
(3) Dampen a rag
(Item 12, Appendix E) with
wash solution and clean the
screen/guard. Carefully use
a scrub brush
(Item 2, Appendix B) to
remove any caked on dirt or
deposits.
(4) Dampen a rag with clean
water and rinse the
screen/guard. Rinse rag in
clean water and continue
until all detergent residue
has been removed.
(5) Wipe the screen/guard with
a clean dry rag until it is
thoroughly dry.
(6) Install the screen/guard per
3-16
