TM 9-4120-407-14
Table 3-2. Unit Preventive Maintenance Checks and Services for Model F36T-MPI - Cont
Location
Procedures
Not Fully Mission Capable
Item To
Interval
Item
if:
Check/Service
No
Check that condenser coil (1) is
Condenser Coil -
Annually
28
securely mounted. If loose,
Cont
notify Direct Support
Maintenance.
Condenser coil is obstructed.
If condenser coil (1) is dirty,
clean it per the following:
(1) Remove condenser coil guard
assembly per
(2) Mix a small quantity of
detergent
(Item 13, Appendix E) with
clean water to make a wash
solution.
(3) Dip a scrub brush
(Item 2, Appendix B) into
the wash solution and clean
the condenser coil by
carefully brushing the fins
up and down to remove any
caked on dirt or deposits.
(4) Rinse the scrub brush with
clean water and carefully
brush the fins up to rinse the
condenser coil. Rinse the
brush in clean water and
continue until all detergent
residue has been removed.
(5) Install condenser coil guard
assembly per
3-43
