TM 9-4120-407-14
Repeated or prolonged skin contact or inhalation of vapors can be
toxic. Use in a well ventilated area and wear gloves.
(3) Soften and remove old adhesive and gasket residue, using a stiff brush.
(4) See Appendix F to identify and fabricate gasket or insulation to be replaced using material
specified.
(5) Coat mating surfaces and gasket with adhesive. Let both surfaces air dry until adhesive is tacky
but will not stick to fingers.
(6) Starting with an end, carefully attach gasket to the surfaces. Press firmly to insure complete
contact.
(7) Should touch up or refinishing be necessary, see TM 43-0139.
NOTE
FOLLOW-ON MAINTENANCE:
4-5