TM 9-4120-407-14
4-6. INFORMATION PLATES REPLACEMENT.
This task covers:
Replacement
INITIAL SETUP
Tools
Equipment Conditions:
Service Refrigeration Unit Tool Kit
Power disconnected. See para 3-6.
(Item 1, Appendix 8)
Rivet Gun (Item 8, Appendix B)
Drill Motor (Item 2, Appendix B)
Drill Bit Set (Item 2, Appendix B)
Materials/Parts
Blind Rivets (as needed) (Item 1, Appendix G)
High voltage is used in this equipment. Be sure power cable is
disconnected prior to performing any maintenance to prevent personal
injury or death.
Replacement.
Drilling through the air conditioner cabinet can cause damage to
internal components if drill is allowed to penetrate too far.
(1) Remove old plate by drilling blind rivets out. Use a drill stop or similar tool to avoid damage to
internal parts.
(2) Install new plate with proper size blind rivets.
4-6
