TM 9-4520-260-13
5-5. BURNER ASSEMBLY - CONTINUED
INSPECTION
1. Inspect burner head (3) for cracks, breaks, holes, or
distortion. Check the threads in igniter boss (6) and
glow plug boss (7) for damage.
2. Replace burner head if defective.
INSTALLATION
1. Position the burner head (3) with new gasket (5) on the
heat exchanger (4).
2. Secure with five screws (1) and pressure pads (2).
Figure 5-4. Replacing Burner assembly.
5-13
