TM 9-4910-387-14-1
2-20. CATERPILLAR FUEL INJECTOR PUMP (cont)|
INSTALLATION (cont)
17
HAND KNOB ASSEMBLY (30). Loosen.
18
FUEL INJECTOR PUMP (23).
a.
Slide forward on mounting rails (28).
b.
Engage coupling (33) with drive coupling (15) leaving
1/16-in. (0.159-cm) gap.
c.
Ensure fuel injector pump is properly seated and tighten all
screws.
19
HAND KNOB ASSEMBLY (30). Tighten.
20
REAR CLAMP BAR (35) AND HAND KNOB ASSEMBLY (36).
Install and tighten hand knob assembly.
NOTE
If Caterpillar fuel injector pump does not require an
external oil line for governor interlock, omit step 21.
21
PIPE TEE (2-2-2 140424) (37), TUBE ADAPTER (MS39158-3)
(38), AND ELBOW (MS39162-3) (39). Install on fuel injector
pump (23).
22
TUBE ADAPTER (MS39158-3) (40). Install.
2-126
