TM 9-4910-387-14-1
39
HOSE ASSEMBLY -1 (70). Install on elbow (43) and either
NOTE
tube adapter (71) in support no. 2 or tube adapter (40).
All of the hose assemblies are tagged with the part number 11020361 and the corresponding dash
number. For ease when installing, the hose assembly nomenclature includes the dash number.
40
HOSE ASSEMBLY -1 (72). Install on lube oil pressure con-
nector (73) and tube adapter (42).
If Caterpillar fuel injector pump does not require an external oil line for governor interlock, omit steps
37 and 38. If an external oil line is required, omit step 39.
41
HOSE ASSEMBLY -2 (74). Install on fuel pressure connector
(75) and straight connector (48).
37
HOSE ASSEMBLY -13 (69). Install on tube adapter (40) and elbow (39).
42
HOSE ASSEMBLY -15 (76). Install on support no. 1 (22) and
38
HOSE ASSEMBLY -1 (70). Install on tube adapter (38) and elbow (43).
lube oil return connector (77).
NOTE
NOTE
Use step 39 only if Caterpillar fuel injector pump does not require an external oil line for governor
interlock.
Position LH accumulators parallel to mounting rails.
43
SIX LINE ASSEMBLIES (78). Install.
2-131