TM 9-4910-387-14-1
2
WASTE TANK ASSEMBLY (3).
NOTE
Valve (4) should be closed after draining is
completed.
a.
Drain waste oil by opening valve (4) and emptying contents of tank
into an available minimum-size 3-gal. (11.36-1) pan (5).
b.
Check for dirt and grease.
c.
Clean outer surface with cleaning compound (item 3, app C) using
rag (item 14, app C).
3-12. LUBE OIL TANK ASSEMBLY -- MAINTENANCE INSTRUCTIONS
INSPECTION AND SERVICING
1
RH PANEL ASSEMBLY (1). Remove by turning three pawl fasteners (2)
counterclockwise until they release.
2
LUBE OIL TANK ASSEMBLY (3).
a.
Check lube oil level sight gage (4) to determine level of lubricating
oil in tank. Remove cap (5) and fill as required with lubricating oil
(item 11, app C).
b.
Check for dirt and grease.
c.
Clean outer surface with cleaning compound (item 3, app C) using
rag (item 14, app C).
ADJUSTMENT
For adjustment procedures of the lube oil tank assembly, refer to page 3-12.
3-27
