TM 9-4910-387-14-1
3-13. FUEL TANK ASSEMBLY -- MAINTENANCE INSTRUCTIONS
INSPECTION AND SERVICING
1
RH PANEL ASSEMBLY (1). Remove by turning three pawl fasteners (2)
counterclockwise until they release.
2
FUEL TANK ASSEMBLY (3).
a.
Check fuel level sight gage (4) to determine level of fuel in tank.
Remove cap (5) and fill as required with fuel (item 13, app C).
b.
Check for dirt and grease.
c.
Clean outer surface with cleaning compound (item 3, app C) using
rag (item 14, app C).
ADJUSTMENT
For adjustment procedures of the fuel tank assembly, refer to page 3-11.
3-14. DRIVE UNIT ASSEMBLY -- MAINTENANCE INSTRUCTIONS
INSPECTION AND SERVICING
1
FRONT PANEL (1). Remove 12 screws (2), 12 washers (3), and remove.
3-28
