TM 9-4910-387-14-1
4-12. FUEL INJECTOR PUMP TESTER MISCELLANEOUS PARTS- MAINTENANCE INSTRUCTIONS (cont)
REPAIR OF ACCUMULATOR MOUNTING PARTS
1
FOUR SCREWS (1) AND FOUR
WASHERS (2). Remove.
2
TWO NUTS (3), TWO WASHERS
(2), AND TWO SCREWS (4).
Remove.
3
TWO STRAPS (5), PLATE (6), AND
BAR (7). Remove.
NOTE
Repair is by replacement
of authorized parts (TM 9-
4910-387-24P) as required.
4
PLATE (6). Position on mounting rails
(8) of tester.
5
BAR (7) AND TWO STRAPS (5). Po-
sition on tester.
6
TWO SCREWS (4), TWO WASHERS
(2), AND TWO NUTS (3). Install.
7
FOUR WASHERS (2) AND FOUR
SCREWS (1). Install.
4-36
