TM 9-4910-387-14-1
4-23.
LUBE OIL FILTER - MAINT ENANCE INSTRUCTIONS
THIS TASK COVERS:
c. Reassembly
a.
Disassembly
b.
Repair
Troubleshooting References
INITIAL SETUP
Lube oil is not being delivered from lube oil pressure inlet
Tools and Special Tools
Equipment Conditions
General mechanic's automotive tool kit (5180-00-177-7033)
Main power source to tester is turned off
References
TM 9-4910-387-24P
DISASSEMBLY
2 PLUG (3). Remove using a 7/16-in.
open end wrench and drain
lubricating oil into an available
minimum-size 2-qt (1.89-1)
container.
NOTE
Hold body assembly while
loosening bolt assembly.
3 BOLT ASSEMBLY (4) WITH GASKET (5).
Loosen using a 5/8-in. open end wrench.
1 LH PANEL ASSEMBLY (1). Remove by turning
three pawl fasteners (2) counterclockwise until
they release.
(SOME PARTS HAVE BEEN REMOVED FOR CLARITY.)
4-76
