INDICATOR LIGHT MAY BE DEFECTIVE

TM 9-4910-387-14-2

3 Check for continuity. If continuity is not present, replace the open

4 If MANIFOLD HEAT light does not light, proceed to step B.

INDICATOR LIGHT MAY BE DEFECTIV.E

NOTE

The following check is for resistance.

1 Connect one multimeter lead to contact (1) on indicator

light and other lead to contact (2) on indicator light.

2 Check for approximate resistance reading of 80 K ohms.

If resistance is not present, replace the indicator light (p

6-41

Privacy Statement
Press Release
Contact