TM 9-4910-387-14-2
6-2.
TROUBLESHOOTING (cont)
I.
WIRES MAY BE OPEN. (cont)
14 Remove both leads. Connect one multimete lead to terminal C8
r
(50). Connect the other lead in sequence to stepping relay contact
(51) and to 500-1000-OFF count switch contact (52). On older tester
models use 500-1000-OFF count switch contact (53).
15 Check for continuity. If continuity checks determine that there is an
open wire, replace the wire (p 6-187).
6-110
