2 Disconnect tachometer indicator cable assembly (4)
from
TACHOMETER indicator assembly (5) and wire leads (6).
NOTE
Both cables are made up of three
different colors of wire.
To
perform continuity checks you
must follow the color from end to
end.
3 Connect one multimeter lead to the end of
each wire lead (7) and connect the other
lead to each contact on quick-disconnect
plugs (8 and 9). This applies to both cable
assemblies.
4 Check for continuity. If continuity does not
exist, replace the cable(s) (p 6-317 and
6440).
5 If TACHOMETER indicator assembly (5)
does not indicate, turn main power source
off and replace TACHOMETER indicator
assembly (p 6-314).
6-119
