TM 9-4910-387-14-2
C.
FRONT TIMING BELT MY BE BROKEN.
D.
TACHOMETER GENERATOR
MAY BE DEFECTIVE.
1 Replace front timing belt (p 6-174) if needed.
Refer to page
for
troubleshooting
procedures.
2 If TACHOMETER indicator assembly does not function, proceed to step D.
E.
TACHOMETER INDICATOR AS-
SEMBLY MAY BE DEFECTIVE.
NOTE
Refer to page 6-116 for troubleshooting procedures.
Each wire that is tested for continuity should also be tested for a
short to the tester frame. This is done by placing one multimeter
lead on the wire terminal and the other lead to the tester frame.
Check for continuity. If continuity exists, the wire is shorted to
ground and must be replaced. This only applies to wires not
connected to ground.
6-123
