TM 9 4910-387-14-2
C.
WIRES MAY BE OPEN.
1 Connect one multimeter lead to
terminal B16 (1). Connect the other
lead in sequence to SLOW switch
contact (2) and to remote control
motor contact (3).
NOTE
Wire at main drive motor
that comes from the remote
control motor is not tagged
with a number.
Identify
wire by color when making
continuity checks. Remove
tape from wire ends. After
making checks, apply new
tape (item 19, app C).
2 Remove both leads. Remove cover
from wire outlet box on main drive
motor. Connect one multimeter lead
to terminal B15 (4). Connect the
other lead to wire end that is
connected to wires tagged no. 1 and
7 at main drive motor.
6-135
