TM 9 4910-387-14-2
E.
REMOTE CONTROL MOTOR MAY BE DEFECTIVE.
NOTE
The following check is for resistance.
1 Connect one multimeter lead to remote control motor contact (1)
and connect the other lead to remote control motor contact (2).
F. CLUTCH MAY BE LOOSE OR
DEFECTIVE.
1 Adjust clutch (p 6-502) if needed.
2 Check for approximate resistance
reading of 30 ohms. If resistance is not
present, replace the remote control
2 If adjustment of clutch cannot be made,
motor (3) (p 6-466).
repair clutch (p 6-502).
3 If drive speed of tester will not increase,
proceed to step F.
6-131
