TM 9-4910-387-14-2
6-4. FUEL INJECTOR PUMP TESTER MISCELLANEOUS PARTS-MAINTENANCE INSTRUCTIONS (cont)
REPAIR OF SHOULDERED SHAFT PARTS (cont)
12. KEY (18), FOUR SCREWS (19), FOUR LOCKWASHERS (20),
AND FOUR FLAT WASHERS (21). Remove.
NOTE
On some tester models, the shaft pillow blocks are
pinned to the tester frame. Pins will have to be driven
out before removal.
13. TWO SHAFT PILLOW BLOCKS (22). Remove from tester frame.
WARNING
Shouldered shaft with remaining parts weighs
approximately 100 lbs (45.36 kg). Be careful when
removing.
14. SHOULDERED SHAFT (23) WITH ATTACHED PARTS.
Pull up
and out of tester.
NOTE
A gear puller may be necessary to remove shaft pillow
blocks.
15. TWO SHAFT PILLOW BLOCKS (22).Remove.
6-178
