TM 9-4910-387-14-2
6-4. FUEL INJECTOR PUMP TESTER MISCELLANEOUS PARTS-MAINTENANCE INSTRUCTIONS (cont)
REPAIR OF SHOULDERED SHAFT PARTS (cont)
20. SIX SETSCREWS (1). Remove.
NOTE
Repair is by replacement of
21. TWO SCREWS (30) AND TWO
authorized parts (TM 9-4910-
LOCKWASHERS (20). Remove.
387-24P) as required.
NOTE
23. ALL PARTS. Clean with cleaning
Rail anchor block is pinned,
compound (item 3, app C) and rag (item
not welded, to tester frame. It
14, app C) before reassembly. Use of
may be necessary to pry rail
abrasive cloth (item 4, app C) may be
anchor block from tester
necessary.
frame with screwdriver.
22. RAIL ANCHOR BLOCK (31). Remove.
NOTE
Pins in rail anchor block must aline with holes in tester
frame.
Use four setscrews to level rail anchor block (31) with
tester frame.
24. RAIL ANCHOR BLOCK (31), TWO LOCKWASHERS (20), TWO
SCREWS (30), AND SIX SETSCREWS (1). Install.
6-180
