TM 9-4910-387-14-2
DISASSEMBLY OF RH CONTROL PANEL ASSEMBLY
NOTE
Before disconnecting and
removing wires, ensure that
all wires are identified and
tagged for reassembly.
2 SIX SCREWS (5 THRU 10) AND SIX
ATTACHED WIRES. Remove.
3 FUEL HEAT SWITCH (11) AND LUBE
HEAT SWITCH (12). Remove.
1 FOUR
SCREWS
(1),
FOUR
LOCKWASHERS (2), AND TWO
SWITCH PLATES (3 AND 4). Remove.
NOTE
Mark wires and both female
connector
plugs
for
reassembly. Plugs are part of
flush motor bases.
5 EIGHT SCREWS (14). Loosen and
remove eight attached wires.
6 TWO FEMALE CONNECTOR PLUGS
(15). Remove.
7 TWO FLUSH MOTOR BASES (16).
Remove.
4 FOUR SCREWS (13). Remove.
6-191
