TM 9-4910-387-14-2
6-6. LH CONTROL EQUIPMENT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
DISASSEMBLY OF LH CONTROL PANEL ASSEMBLY
NOTE
Before disconnecting and removing wires, ensure that
all wires are identified and tagged for reassembly.
1 EIGHT SCREWS (1 THRU 8). Loosen and remove eight attached
wires.
NOTE
Before removing legend plates, note location of each
for proper reassembly.
2 THREE LENS CAPS (9), LENS CAP (10), AND FOUR LEGEND
PLATES (11 THRU 14). Remove.
3 START SWITCH (15), FAST SWITCH
(16), STOP SWITCH (17), AND SLOW
SWITCH (18). Remove.
4 FOUR SCREWS (19 THRU 22) AND
FOUR ATTACHED WIRES. Remove.
6-224
