TM 9-4910-387-14-2
NOTE
Wires were tagged with termination points at
disassembly. Ensure that wires are connected to
correct locations.
4 WIRE. Position one end with terminal lug on terminal A1 and
position other end with terminal lug on forward tachometer reversing
relay contact (13).
5 SCREW (14). Install through terminal lug into terminal A1.
reversing relay contact (13) and position other end with terminal lug
on reverse tachometer reversing relay contact (15).
7 TWO SCREWS (16 AND 17). Install.
6-231
