TM 9-4910-387-14-2
16-6. LH CONTROL EQUIPMENT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
INSTALLATION (cont)
NOTE
Wires to be connected to starter, terminal strip A, and
terminal strip B were tagged with termination points at
disassembly. Ensure that wires are connected to
correct locations.
19 THREE WIRES. Install on starter contacts (44, 45, and 46) and
tighten three screws (47).
20 THREE WIRES. Install on starter contacts (48, 49, and 50) and
tighten three screws (51).
21 FIFTEEN WIRES. Position on the LH terminals of terminal strip A
(52) as marked, install fourteen screws (53) and tighten.
6-250
