TM 9-4910-387-14-2
21 START SWITCH (43), FAST SWITCH (44), STOP SWITCH (45),
AND SLOW SWITCH (46). Position on LH control panel (10).
NOTE
Ensure each legend plate is in proper location.
22 FOUR LEGEND PLATES (47 THRU 50), LENS CAP (51), AND
THREE LENS CAPS (52). Install.
23 WIRE TAGGED B4. Position one end on STOP switch contact (53)
and tighten screw (54).
24 WIRE TAGGED B3. Position one end on STOP switch contact (55)
and tighten screw (56).
25 WIRE TAGGED B1. Position one end on START switch contact
(57) and tighten screw (58).
26 WIRE TAGGED B2. Position one end on START switch contact
(59) and tighten screw (60).
D WIRE TAGGED B14. Position one end on FAST switch co tact
n
(61) and tighten screw (62).
28 WIRE TAGGED B15. Position one end on FAST switch contact (63)
and tighten screw (64).
29 WIRE TAGGED B15. Position one end on SLOW switch contact
(65) and tighten screw (66).
30 WIRE TAGGED B16. Position one end on SLOW switch contact
(67) and tighten screw (68).
6-245
