TM 9-4910-387-14-2
REASSEMBLY/INSTALLATION
1
HEATER (1). Install in manifold chamber (2) and
secure with tube inverted nut (3).
2
THERMOSTATIC SWITCH (4). Install and secure with
setscrew (5).
3
TWO SPAGHETTI TUBINGS (6).
a. Install on the two thermostatic switch wires (7).
b. Insert in manifold chamber (2).
4
RESISTANCE CAPSULE (8). Install.
5
BOX CONNECTOR (9). Install on manifold chamber
(2).
6
WIRE CABLE (10). Push through box connector (9).
7
GREEN WIRE (11) WITH TERMINAL LUG. Install on box
connector (9) and secure with screw (12).
8
SCREW (13). Tighten.
6-311
