TM 9-4910-387-14-2
NOTE
Do not perform steps 24 thru 29 unless replacement of
indicated parts is necessary as alignment at reassembly
is difficult.
24
SPRING STUD (32). Remove from graduate housing casting (38).
25
RETAINER (39), DUMPING SHAFT BEARING (40), AND
PREFORMED PACKING (41). Remove.
CAUTION
Do not remove bearing from graduate housing casting
unless replacement is necessary as removal will
damage bearing.
26
BEARING (42). Remove.
27
THREE MACHINE SCREWS (4),
RETAINER (39), DUMPING SHAFT
BEARING (43), AND PREFORMED
PACKING (41). Remove.
CAUTION
Do not remove bearing from
graduate housing casting
unless
replacement
is
necessary as removal will
damage bearing.
29
DUMPING SHAFT ASSEMBLY (44).
Remove.
28
BEARING (42). Remove.
6-343