TM 9-4910-387-14-2
6-18.
GRADUATE RACK ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
DISASSEMBLY (cont)
NOTE
Steps 42 and 43 can not be
performed if disassembly
steps 24 thru 29 were
omitted.
Tube clamp support stiffener
and two tube clamp supports
must be disassembled before
removal.
40
TWO SCREWS (48) AND TWO
42
SIX SCREWS (48) AND SIX
41
BRACKET (51). Remove.
43
TUBE CLAMP SUPPORT STIFFENER
(52) AND TWO TUBE CLAMP
SUPPORTS (53). Remove.
CAUTION
Do not remove bearings unless replacement
is
necessary as removal will damage the bearings.
44
TWO BEARINGS (54). Remove from two tube clamp supports (53).
6-346