TM 9-4910-387-14-2
DISASSEMBLY (cont)
11 SWITCH ACTUATING CAM ASSEMBLY (16).
a. Scribe a mark on the gear shaft (17) on both sides of the
switch actuating cam assembly (16) for proper alinement
during reassembly.
b. Loosen setscrew (18).
c. Remove switch actuating cam assembly (16).
12 GEAR SHAFT (17) AND ATTACHED PARTS. Remove.
NOTE
Do not remove bearings unless necessary for
replacement of parts attached to gear shaft as removal
13 BEARING (19) AND GEAR SPACER (20). Remove.
14 GEAR SHAFT (17). Scribe with mark for proper alinement of worm
gear (21) during reassembly.
15 SETSCREW (22). Remove.
16 WORM GEAR (21), GEAR SPACER (20), AND BEARING (19).
Remove from gear shaft (17).
6-428