TM 9-4910-387-14-2
6-26. COUNTER PULSE SWITCH AND TACHOMETER GENERATOR ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY/ALINEMENT (cont)
5 WORM GEAR (7).
a. Install on gear shaft (8).
b. Aline with scribed mark.
c. Aline hole on worm gear (7) with
flat segment on gear shaft (8).
6 TWO GEAR SPACERS (10) AND TWO
d. Install setscrew (9).
BEARINGS (11). Install.
8 GEAR COVER (12). Install and secure
with three flat washers (13), three
lockwashers (14), and three screws (15).
NOTE
Ensure gear teeth mesh.
7 GEAR SHAFT (8) AND ATTACHED
PARTS. Install.
6-432
