REPAIR
REASSEMBLY
1 SETSCREW (1). Install in cam (2).
NOTE
Repair is by replacement of
NOTE
authorized parts (TM 9-4910-387-
Step 2 is only needed for initial
24P) as required.
installation or when installing a
new drive screw and cam.
2 DRIVE SCREW (3). Install in cam (2).
INSTALLATION
1 SWITCH ACTUATING CAM ASSEMBLY (1). Install on gear shaft
(2), alining with scribed mark.
2 SETSCREW (3). Tighten.
6-455
