TM 9-4910-387-14-2
6-32. DRIVE UNIT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
DISASSEMBLY (cont)
b. Install in threaded holes.
c. Tighten alternately.
29 BUSHING (58), THREE SCREWS (56),
THREE LOCKWASHERS (57), AND
KEY (59). Remove.
30 SPROCKET (60). Remove.
28 THREE SCREWS
(56)
AND
THREE
LOCKWASHERS (57)
a. Remove.
31 FOUR SETSCREWS (61). Loosen.
CAUTION
Do not remove bearing units unless
necessary for replacement as
damage to bearing units may occur.
32 TWO BEARING UNITS (62). Remove.
35 FITTING (65). Remove.
33 RETAINING RING (63). Remove.
34 PULLEY (64). Remove.
6-478
