TM 9-4910-387-14-2
37 RETAINING RING (67). Remove from
output shaft (53).
CAUTION
Do not remove bearing unless
necessary for replacement as
damage to bearing may occur.
36 BEARING (66). Remove.
NOTE
Clutch assembly can not be removed from output shaft
without completely disassembling the clutch assembly. If
replacement of output shaft is necessary, refer to para 6-33, p
38 FOUR SETSCREWS (68). Loosen.
CAUTION
Do not remove bearing units unless necessary
for
replacement as damage to bearing units may occur.
39 TWO BEARING UNITS (62). Remove.
6-479
