TM 9-4910-387-14-2
6-32. DRIVE UNIT ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)l
REASSEMBLY/ALINEMENT
1 KEY (1). Install on reduction shaft (2).
2 BUSHING (3). Install approximately 4.875 in.
(12.383 cm) from end of reduction shaft (2).
3 TIMING BELT SPROCKET (4). Install and secure with
three lockwashers (5) and three screws (6) inserted in
unthreaded holes of bushing (3).
4 KEY (7). Install.
5 TAPER-LOCK FITTING (8). Install approximately 3.625
in. (9.208 cm) from end of reduction shaft (2).
6-484
