TM 9-4910-387-14-2
6-41. PIPING ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
c. FUEL SYSTEM-MAINTENANCE INSTRUCTIONS (cont)
REMOVAL/DISASSEMBLY (cont)
CAUTION
Do not remove clinch sleeves
from copper tubings unless
necessary for replacement, as
clinch sleeves or tubings may
be damaged during removal.
39 MALE ELBOW (54) AND MALE TEE
(55). Remove.
NOTE
Nuts cannot be removed from copper tubings without
first removing clinch sleeves. Nuts are not part of the
copper tubings, but are part of components to which
the tubings are connected.
Each copper tubing, when removed, has one clinch
sleeve and one nut located at each end. Repeat the
following procedures as required for each tubing.
40 CLINCH SLEEVE (56). Remove from copper tubing by cutting.
41 NUT (57). Remove.
6-596
