TM 9-4910-387-14-2
INSPECTION/SERVICING
REPAIR
3 ALL REMAINING PARTS. Repair by replacement (TM 9-4910-387-24P).
FUEL SYSTEM
.
a. Check for cracked, broken, or missing parts.
b. Check for damaged threads.
d. Clean clogged parts by blowing out with air.
REASSEMBLY/INSTALLATION
NOTE
Clinch sleeves must be replaced with new items if
CAUTION
previously removed.
Be sure to aline nuts carefully when installing as
improper alinement will damage the ferrules and the
Nuts are not part of the copper tubings, but are part of
copper tubing.
the components to which the tubings are connected.
Each copper tubing has one clinch sleeve and one nut
located at each end. Repeat steps 1 and 2 as required
for each tubing.
6-597
