Ignition unit adapter (4910-00-356-7508).
(2) Reconnect cable to open end of ignition unit adapter. Securely
tighten all connectors.
(3) Refer to operating instruction manual of test unit being used, and
perform tests as indicated in vehicle service manual.
(4) After tests have been completed and adapters removed, reconnect
cables and make sure they are tight and waterproof.
High Tension Adapter.
c.
(1) Disconnect cable at any accessible spark plug and attach high ten-
sion adapter to spark plug.
(2) Reconnect spark plug cable to high tension adapter and tighten se-
curely (fig 5).
4
