9-4910-609-14&P
TM
3.3
Start-up
3.3.1 Depress handle of Item 2-6 into UP position, and hold until
Release handle.
It will auto-
the desired height is reached.
matically return to neutral (center) position.
(See
Dead Stop ).
for
3.3.2 Swing overhanging arm and radiator holding assembly to desired
position.
3.3.3 Lock the safety device (Item 1-1-1)
Rotate holding assembly on horizontal
3.3.4 Loosen locknut (Item 5-4).
plane to desired position.
3.3.5 Tighten locknut (Item 5-4).
Rotate radiator holding assembly
3.3.6 Loosen hand-knob (Item 3-4).
to desired position.
3.3.7 Tighten hand-knob (Item 3-4).
3.3.2 thru
3.3.8 Prior to lowering the fixture, repeat steps
3.3.7, in reverse order.
DOWN position, until desired
3.3.9 Depress handle (Item 2-6) in
height is reached.
3.4
Normal Operation
3.4.1 Position radiator on lower pads (Item 5-6, two ea with lower
pads at approximately equal distances from the center of the
holding fixture).
3.4.2 Place upper pads (Item 5-7) directly above lower pads.